Horizontal Cnc Lathe CK61100 Advanced Turning Machine No reviews yet

1. High rigidity bed CK61100 heavy machine tool bed body is made of high-quality cast iron, the internal rib layout is reasonable, the bed adopts integral type, the guide rail width is 600mm, and the rigidity is good. The sliding guide rail adopts medium frequency quenching, the hardening layer is deep, the hardness is above HRC50°, and the joint surface of the drag plate and the bed is pasted. 2. Introduction of the main drive The spindle of this series of machine tools is hydraulic four-speed stepless speed regulation, spindle speed is 17-653 rpm, (optional manual four-speed stepless speed regulation, spindle speed is 20-790 rpm), large torque, good reliability. The spindle bearing adopts high-precision bearing, which runs smoothly and has high precision. 3. Feed system The Z-axis feed system of the machine tool adopts the transmission mode of servo motor driving the ball screw, and the X-axis feed system adopts the transmission mode of the servo motor directly driving the ball screw through the coupling. The main lead screw of the machine tool is selected from the high-precision lead screw of Shaanxi Hanjiang Machine Tool Co., Ltd., and each lubrication point of the feed system is lubricated regularly by the centralized lubrication system. 4. Tool holder This series of lathes adopts vertical four-station electric tool holder, and there is no need to lift the cutter body when the four-station tool holder is rotated, which excludes the intrusion of coolant and cutting to the tool holder when it is rotated, and has high sealing. 5. Electrical system (1) CNC system and servo drive system The CNC system of the machine tool adopts a wide numerical control system, which can adapt to high-efficiency, high-speed, high-precision machining, and has the characteristics of convenient operation, complete functions and high reliability. (2)The electrical cabinet adopts a fully enclosed type.

The tailstock consists of two parts: the upper body and the lower body. The upper body is equipped with a sleeve and a sleeve fast and slow movement mechanism. The tailstock sleeve cone hole of the machine is 6 on the Mohs scale and can be used with a Mohs 5 tip if attached to the cone sleeve. The tailstock of the machine tool has the characteristics of high precision, strong bearing capacity, long maintenance cycle and reliable work.

CK61100 machine bed adopts high-quality cast iron, the internal rib layout is reasonable, the bed adopts split type, and the rigidity is good. The sliding guide rail adopts medium frequency quenching, the hardening layer is deep, the hardness is above HRC50°, and the joint surface of the drag plate and the bed is pasted.